User manual

OEM Device Configuration Guide
revision 3 — 25
4. Personal Safety
4.1. Visonic SpiderAlert
The SLC-5 (SpiderAlert Local Controller) is the main controller designed for the SpiderAlert 5 alert
signaling network.
A standard RS-232 cable can be used to connect the host computer to the SLC-5 via the SLC-TO-SSK
Adapter. A six-wire cable with RJ-11 connectors at both ends is used to connect the SLC-TO-SSK Adapter
to the SLC-5.
B.A.S.I.S. currently supports the “Single-Site Direct Connection To Computer” operating mode. For this
mode, SW1 & SW2 dip switches need to be set to the ON position on the SLC-5.