Specifications

C•CURE apC/L Technical Manual
Setting Up the apC/L Panel
6-13
When Red3 and Yellow1 LEDs are both on, the flash ROM is being updated;
all other LEDs except the power LED are off.
LED on the apC/L cabinet The single LED on the apC/L cabinet door
can display three different colors, each signifying various states of the
apC/L.
Table 6.6 apC/L Door LED
LED
Color
State
Red Reset Condition which is seen at initial power up or when
you push the reset switch (SW2). If the LED cycles
between yellow and red after power up, there is a problem
with the unit.
Yellow The unit has successfully completed its power up
sequence, but is not yet on line with the host computer, or it
has been on line but lost communication with the host
computer. (The color yellow is a combination of the
internal green and red LEDs and may appear to be a dull
red color.)
Green The unit is on line with the host.
apcl.bk Page 13 Monday, May 15, 2000 3:21 PM