Specifications

C•CURE apC/L Technical Manual
apC/L Panel Setup
6-12
LED Bar The LED Bar is located above the communications LEDs. (See
Figure 6.3).
Table 6.5 indicates the color of the LEDs in the bar, their state, and their
meaning.
Table 6.5 apC/L LED Bar
LED ON OFF Flashing
Red1 Reset/Fault Normal operation
Red2 Reader error; a configured reader or
RM module is offline
Normal operation
Red3 Reserved for system use Normal operation
Yellow1 DTR enabled for dialup and modem
on hook
DTR disabled DTR enabled for
dialup and modem off
hook. Direct connect
will flash when apC/L
transmits to host
Yellow2 DTR enabled but apC/L on hook
with a modem that is not reporting as
if it is online
Normal operation
Yellow3 0.5 second flash when monitor point
changes (online monitor point only)
Normal operation
Yellow4 Offline from host Normal operation Message received
from host
Green1 0.5 second flash while scanning
monitor points
Hardware problem
Green2 1 second flash during normal
operation (program heartbeat)
Hardware problem
Green3 Power on Power off
apcl.bk Page 12 Monday, May 15, 2000 3:21 PM