Specifications

C•CURE apC/L Technical Manual
How to Use this Manual
vii
How to Use this Manual
This manual has seven chapters and six appendices.
Chapter 1: Overview
Gives an overview of the apC/L unit and describes the optional modules and
card readers.
Chapter 2: apC/L Physical Requirements
Gives the minimum requirements for the apC/L including wiring
requirements, power supply limitations, and apC/L event storage. The chapter
also describes how to connect the apC/L to the host and how to connect relay
outputs.
Chapter 3: Identifying Hardware and Mounting the apC/L
Lists the hardware supplied with the apC/L and describes how to mount the
unit.
Chapter 4: Wiring Card Readers
Provides information on card reader wiring configurations, installing a card
reader, and optional installations such as keypads and heaters.
Chapter 5: Input and Output Modules
Describes the optional modules the apC/L supports and how to install them.
Chapter 6: apC/L Panel Setup
Gives instructions for setting up the apC/L panel, including switch and jumper
settings.
Chapter 7: Testing the apC/L Installation
Explains how to test the apC/L installation, including the readers and the
apC/L main board.
Appendix A: Equipment Specifications
Lists the apC/L operating specifications, and dimension and weight
specifications.
Appendix B: Calculating Maximum Wire Lengths
Contains the procedures for calculating maximum wire lengths for the apC/L
installation.
apcl.bk Page vii Monday, May 15, 2000 3:21 PM