Specifications

C•CURE apC/L Technical Manual

Optional Heater Kits

4-31

Optional Heater Kits

If the reader is installed outdoors, a thermostatically controlled heater

(#130-915 or 130-915A) may be necessary. The 130-915 heater kit is

supplied with a 12 V, 40VA transformer for operation on 110 VAC. The

heater switches on at 40° F. Heater kits are available from Sensormatic.

For non-Sensormatic readers

No heater is required and operating temperatures are specified by

the manufacturer. The RM4 should be installed indoors.

For Standard RM series readers

The current draw for each strip is 1.25 A at 12V. Figure 4.13

illustrates heater placement for these readers.

Note Installation instructions are included with the reader kits.

apcl.bk Page 31 Monday, May 15, 2000 3:21 PM