Specifications

C•CURE apC/L Technical Manual
MRM-4 Personality Module Reference Drawing
4-29
MRM-4 Personality Module Reference Drawing
The MRM-4 personality module sets reader characteristics and provides
connections to inputs, door strikes, and the apC/L. (See Figure 4.12.) This
module is no longer offered and has been replaced by the RM-4. This
diagram is for reference only.
Figure 4.12 MRM-4 Personality Module
P5P1
w2
w1
w3
P2
P3
w4
sw1
P4
Pin 1
12345
4321
1
2
3
4
5
6
7
8
9
0
MRM
REV.6 or 7
1234 56789 1110
MICROPROCESSOR
tamper
1keypadY3
2keypadY2
3keypadY1
4keypadY0
5keypadX3
6keypadX2
7keypadX1
8keypadX0
P2
OPEN: tamper switch enabled
CLOSED: tamper switch disabled
1 sensor card termination
2 sensor strobe termination
3 sensor data termination
4 sensor +5Y
5sensorGND
1 sensor data 1 termination (white)
2 sensor data 0 termination (green)
3 (not used)
4 +5Y (red)
5 GND (black)
WIEGAND and PROXIMITY
MAGNETIC STRIPE
Chassis
Ground
1 apC +12Y
2 apC +TXD/+RXD
3 apC -TXD/-RXD
4 apC GND
5 ARM-1 (+)
6 ARM-1 (-)
7GND
8 supervised input 1
9 supervised input 2
10 supervised input 2
11 supervised input 2
P1
P5
P4
1 LED board +12 V
2 LED board red LED
3 LED board yellow LED
4 LED board green LED
MAGNETIC STRIPE
WIEGAND
1 Not used
2
3 Not used
4
Red LED
Jumper 2 and 4
andattachbrown
wire from sensor
apcl.bk Page 29 Monday, May 15, 2000 3:21 PM