Specifications

C•CURE apC/L Technical Manual
Wiring Card Readers
4-28
2. Install the box in the desired location and attach the conduits.
If you must install the module in the door frame instead, cut a hole in
the mullion to accommodate the reader wiring, then install the reader
backplate over the hole.
3. Mount the RM-4 module with screws and standoffs.
4. To ground the module to the box, either make a connection from lug
J5 to earth ground or use a metal standoff and screw in the lower right
mounting hole. Make sure that the connection is continuous to the
box. See Figure 4.10 for the location of the grounding lug J5.
apcl.bk Page 28 Monday, May 15, 2000 3:21 PM