Specifications

C•CURE apC/L Technical Manual
Wiring Card Readers
4-20
For an RM:

Connect one lead to pin 6 of P5

Connect the other lead to pin 7 of P5
For an MRM:

Connect one lead to pin 10 of P5

Connect the other lead to pin 11 of P5
8. Connect the reader leads as follows
For an RM:

Connect the keypad leads to pins 1-8 of J2. Not all readers use the
keypad (J2) terminal

Connect the data leads to pins 1-6 of J3

Connect the LED leads to pins 1-4 of J4. Not all readers use the
LED (J4) terminals
For an MRM:

Connect the keypad leads to pins 1-8 of P2. Not all readers use
the keypad (J2) terminal

Connect the data leads to pins 1-5 of P3

Connect the LED leads to pins 1-4 of P4
Note Not all readers use the LED (J4) terminals.
apcl.bk Page 20 Monday, May 15, 2000 3:21 PM