Specifications

C•CURE apC/L Technical Manual
Wiring Card Readers
4-14
Figure 4.6 Connecting Two ARMs to an RM-4
5. Connect the second twisted pair to the relay contact terminal
connector (COM and NO or NC) as required for the controlled
device. Connect the other end of the cable to the controlled device
itself.
6. If the power supply is DC, install a diode (Motorola or other
manufacturer #1N4933) across the door strike to suppress noise. The
P5
ARM-1
ARM-2
apcl.bk Page 14 Monday, May 15, 2000 3:21 PM