Specifications

C•CURE apC/L Technical Manual
Setting Up a Reader
4-11
SW3-6: Set this switch
ON when mixing RM
personality modules
with the older MRM
personality modules
(typically retrofit
installations). This
provides for uniform
LED operation
throughout the
installation as MRM’s
do not directly support
external bi-color
LED’s. SW3-3 should
be OFF when using
this switch.
LED option Normal J4-3 pulses low when
either the red or green
LED is activated.
*The improper setting of this switch may cause the reader to behave erratically.
Table 4.2 SW3 Reader Configuration Switch Settings
This Switch... Controls... When OFF (Open) When ON (Closed)
apcl.bk Page 11 Monday, May 15, 2000 3:21 PM