Specifications

C•CURE apC/L Technical Manual
apC/L Physical Requirements
2-4
Cabling
If you need a plenum-rated cable for the host-to-apC/L or apC/L-to-RM
communications, you can substitute the following for the cables
referenced in this manual:
n
Use Manhattan (# M63995) for 2-pair only, 24 AWG, 120 ohm, 12.5
pf/ft, with foil shield. For the apC-to-RM connection, use only one of
the pairs.
n
Use Belden 89729 for 2-pair, 24 AWG, 150 ohm, 8.8 pf/ft. Use
Belden 89182 for 1-pair 22 AWG, 100 ohm, 12.95 pf/ft., with foil
shield. These two cables are also rated for underground burial.
apcl.bk Page 4 Monday, May 15, 2000 3:21 PM