Specifications

C•CURE apC/L Technical Manual
apC/L Physical Requirements
2-2
External Devices and the apC/L
External devices connect to the apC/L via numbered ports located on the
left and right sides of the board. Groups of ports are reserved for
connecting specified types of devices. Connectors and device types are
listed in Table 2.1.
Equipment Wiring Requirements
Table 2.2 lists the wiring requirements for apC/L and components.
Consult the Belden specifications for information on capacitance and
resistance.
Table 2.1 External Device Connectors
Device(s) Connector
Reader Bus or Input/Output modules P6
Reader Bus or Input/Output modules P7
Relay output 1 P4
Relay output 2 P5
Power failure input P3*
Auxiliary/Diagnostic port P11
Host computer P10
Backup Battery connection P9
AC Transformer Connection P8
*Only functional on certain models, contact Sensormatic for further
information.
apcl.bk Page 2 Monday, May 15, 2000 3:21 PM