Specifications

C•CURE apC/L Technical Manual
APPENDIX F
Modem Settings
An apC/L in dialup mode at a remote location connects to the host using
standard, voice-grade telephone lines instead of hardwired or leased
telephone lines. In many applications, dialup mode is more convenient
and cheaper than other communications modes.
Sensormatic Access Control Division has identified a special OEM
modem for dialup and lease-line applications. This modem has been
manufactured to Sensormatic ACD specifications to guarantee optimal
performance when used with the C•CURE 1 Plus Ultra, C•CURE 750,
and C•CURE 800/8000 in either dialup or lease-line configurations.
Sensormatic ACD has tested modems made by various manufacturers and
has found that due to constantly changing manufacturer’s specifications,
we could not guarantee that the next release of a particular modem would
still function properly with previously defined setups and our system
requirements. As a result, Sensormatic ACD does not guarantee operation
nor offer technical support for any modem other than our OEM modem.
When using a modem for dialup mode, make sure the modem is operating
with command echo off and Data Terminal Ready (DTR) enabled.
You can configure modems by using software commands or by setting
DIP switches.
apcl.bk Page 1 Monday, May 15, 2000 3:21 PM