Specifications

C•CURE apC/L Technical Manual
Setting Software Switches
E-6
Setting Software Switches
Software switches extend the capabilities of the apC/L, allowing you to
program functionality with the C•CURE system you are using.
C•CURE 1 Plus Ultra
For elevator control, set Software Switches 11 and 12 to 1.
To enable second output on an RM reader, set Software Switch 8 to ON.
This will disable the first RM 8 Output Module and allow the system to
recognize the second RM output.
apcl.bk Page 6 Monday, May 15, 2000 3:21 PM