Specifications

C•CURE apC/L Technical Manual
x
Important Safety Information
Operating problems are often caused by failure to ground system components
properly. Be sure to follow all instructions for grounding described in this
manual.
The following precautions apply to all procedures described in this manual.
1. To meet life safety requirements, a fail-safe mechanism override must be
installed at each card reader exit to allow people to leave the secure area
in case of electro-mechanical device failure.
2. The apC/L unit described in this manual could cause electrical shock.
Installation and maintenance should be performed only by qualified
personnel. Make sure power is removed before the system is installed.
3. The apC/L and printed circuit boards in the reader devices are susceptible
to damage by static electricity. When handling these devices:
n
Make sure your work area is safeguarded
n
Transport all components in static-shielded containers
4. On the apC/L, the power wiring to RMs and readers is power limited
through PTC protection devices.
IMPORTANT
Changes to the apC/L not expressly approved by the party
responsible for compliance could void your authority to operate
the equipment.
apcl.bk Page x Monday, May 15, 2000 3:21 PM