Instruction manual

Page 29
Using MeterMate Version 2.12 with the kV RSX
MeterMate 2.12 can be used to build programs for both the kV Modem and the kV RSX option
boards. The following instructions pertain to building MeterMate programs for the kV RSX option
board operating in the external modem mode of operation.
Default MeterMate Program for kV RSX
Begin by creating a basic kV RSX default program from which all kV RSX programs will be built.
This process assumes that the default MeterMate programs have not been modified since
MeterMate was installed.
Begin by starting the MeterMate Windows program builder. Select Editors, Modem Option
Editor, Table Name “Default”. After the Modem Option: Default screen opens, edit the Modem
Configuration form so that it appears as follows:
Save this modified table with the table name “RSXdef”. Whenever building a new kV RSX
MeterMate program, select the “RSXdef” Modem Option Table as a starting point.