Instruction manual

Page 16
I/O-2 Input/Output Option
The I/O-2 Input/Output option board (GE part
# 9938226004) is a direct replacement for
the I/O-1 option board (see above) and was
designed to be compatible with the kV RSX
Option Board. It may be installed directly
onto the kV™ Meter, the kV RSX Option
Board, or to the LP-2, Load Profile option
board. See Table 2: I/O-2 Compatibility for
more details.
Option Boards
I/O-2 LP-1 LP-2 kV RSX
√
√ √
√ √
√
Modem
Ready kV
only
√ √
Modem
Ready kV
only
Table 2: I/O-2 Compatibility
LP-1 Load Profile Option Board
(Obsolete)
The LP-1 Load Profile option board (GE part
# 9938348005) is now obsolete and has been
replaced by the LP-2 Load Profile option
board (GE part # 9938348007). The LP-1
option board cannot be used with the kV
RSX Option Board. If load profile information
is needed in a kV™ Meter with a kV RSX,
the LP-2 option board must be used. See
Table 3: LP-1 Compatibility for more details.
Option Boards
LP-1 I/O-1 I/O-2 kV RSX
√
√ √
√ √
Table 3: LP-1 Compatibility
LP-2 Load Profile Option Board
The LP-2 Load Profile option board (GE part
# 9938348007) is a direct replacement for
the LP-1 option board (see above) and was
designed to be compatible with the kV RSX
Option Board. It may be installed directly
onto the kV™ Meter or the kV RSX Option
Board. See Table 4: LP-2 Compatibility for
more details.
Option Boards
LP-2 I/O-1 I/O-2 kV RSX
√
√ √
√ √
√
Modem
Ready kV
only
√ √
Modem
Ready kV
only
Table 4: LP-2 Compatibility
kV RSX Option Board
The kV RSX Option Board may be used in
combination with the I/O-2 Input/Output, and
LP-2 Load Profile option boards. See Table
5: kV RSX Compatibility for more details.
Option Boards
KV RSX
(Modem Ready kV
only)
I/O-2 LP-2
√
√ √
√ √
√ √ √
Table 5: kV RSX Compatibility
MeterMate

Software
Compatibility
The kV RSX Option Board is compatible with
the following software:
1. MeterMate™ Version 2.12 or greater
2. Utility Translation Systems, Inc.’s MV-
90