Specifications

46
Future Wholesale for all your future needs
HS841A
4 IN 1 OUT HDMI SWITCH
SPECIFICATIONS
COMPLIANT WITH HDMI V1.3
ON-CHIP EQUALIZER WHICH ALLOWS DATA TRANSMISSION
ON LONG CABLES.
SIGNAL ENHANCE LEVEL MANUAL CONTROL
SUPPORT HDTV 480I/P 576I/P 720I/P 1080I/P
LARGE LCD DISPLAY WITH BLUE BACK LIGHT
PRE-SET DEVICE NAMES
REMOTE OR MANUAL CONTROL
POWER SUPPLY 7.5DC / 800MA 230VAC
GIFTBOX SIZE 390 X 70 X 205MM
WEIGHT 1.3KG
AVL10
Designed to convert the impedance of RGBHV signal to 100ohm for transmission
over UTP - CAT5E data cable.
Signal distortion is minimised as high frequency noise is filtered from the received
signal.
Use with existing premises wiring for easy and cost effective installation.
1 x VGA Socket
1 x CAT5 (RJ45) Socket
AVL12
Designed to convert the impedance of video and/or audio signals to 100ohm for
transmission over UTP (Unshielded Twisted Pair) cable. Signal distortion is mini-
mised as high frequency noise is filtered from the received signals. Can be used
for either NTSC or PAL video signals. Two optional audio channels for HF stereo
signals. Built in impedance matching device and filter for video and audio signal
transmission Use with existing wiring and wall jacks for an easy and cost effective
installation Three RCA outputs
Component RGB
AVL14
Designed to convert the impedance of video and/or audio signals to
100ohm for transmission over UTP (Unshielded Twisted Pair) cable.
Signal distortion is minimised as high frequency noise is filtered from
the received signal.
Can be used for either NTSC or PAL video signals
Two optional audio channels for HF stereo signals
Built in impedance matching device and filter for video and audio
signal transmission
Use with existing wiring and wall jacks for an easy and cost effective
installation
Three RCA outputs
HOME THEATRE