Specifications

45
Future Wholesale for all your future needs
Plasma Friendly Hard Wired Infra-Red
repeater kit for use in DIY &/or custom
installations, to control an A/V device
at a remote location (up to 1.8m). All
connections are plug & play, and the
kit includes discrete Flat IR target,
junction box, double emitter & switch
mode power supply.
Compact Distribution Module for use in
resi-linx® NEW 'linx-IR' patented Discrete
Infra Red system, with RL-IR505 (Receiver
Module and Flat Target). Advantage of
Discrete IR control of specific AV devices
from each zone, ideal where two of the
same AV devices are installed in the one
area. Ability to distribute to multiple zones
with loop wiring configuration using RL-
IR505, or star wiring via RL-IR170 IR
Distribution Hub.
Target Junction Box is for use in
Vcomm's NEW IMPROVED Hard
Wired IR control system with RL-
IR300 IR Junction Box, RL-IR500
and RL-IR600 Flat and Tube tar-
gets and RL-IR700 or RL-IR800
Emitters. The RL-IR400 is used to
link AV equipment in multiple
Plasma Friendly" Flat IR Target for use
in the resi-linx ® range of RF IR Video
Distribution system. The target receives
IR commands from remote controls and
sends the signal through the Video Hub
and Emitters to control the AV device at
a remote location.
IR emitter that repeats IR remote con-
trol signals received at an IR target and
sent back through the cable to the AV
equipment. Compatible with RF IR
pass back systems (5V) and Hard
Wired IR systems (12V)
Double head blaster-type IR emitter
that repeats IR remote control signals
received at an IR target and sent back
through the cable to the AV equipment.
Compatible with RF IR pass back
systems (5V) and Hard Wired IR sys-
tems (12V)
Tube IR Target used in the IR
Distribution System. When com-
bined with other products in the IR
Distribution System it will allow you
to send IR Signals to control elec-
tronic devices from remote loca-
tions. Mounted in a wall plate, in the
ceiling or in a cabinet,
Reverse path IR control and, when
combined with other products in the IR
range, will allow you to control the AV
inputs from other locations by sending
signals down existing RF cables. The
curved design enables maximum pickup
of IR signals from remote controls whilst
being stylishly unobtrusive in your home.
Perched next to your TV,
The A/V Adapters are used in
pairs to send/receive video and
audio signals (with a remote
power option) down UTP cable.
The remote power is used when
a security camera is installed in
a location without a power
source
Volume Control with powerful inbuilt 12W
RMS amplifier for use with Audio Distribu-
tion Module (RL-MRA310). Powered re-
motely via power cable connected to the
Audio Distribution Module.
Inbuilt IR target with talk-back LED. Unit
transmits IR signals back to Input Module
for control of source at a remote location.
Backlit keypad buttons - Toggle on / off,
adjustment of Volume / Source / Bass /
Treble. LCD display for Functions / Source
4 Source Audio Distribution Module for use
with Amplified Volume Controls. Converts
Audio line level signal to balanced electri-
cal signals for transmission along twisted
pair cable and remotely powers up to 4
Zone Volume Controls, connection via
RJ45 sockets. Audio Source inputs via
3.5mm mini jack or via RJ45 sockets on
Remote Input Module. Push clamp termi-
nals for Volume Control power cable. IR
control of source from
UHF Modulator with loop through terminals
and IR Control. When combined with the
RL-RF380 and other products in the IR
range, the RL-RF115 Modulator allows you
to control the AV inputs from other loca-
tions by sending signals (from remote
controls) down existing RF cables. The RL-
RF115 must remotely power the RL-RF380
when using the IR Control. The loop
through terminals allow a user to modulate
a STEREO AV quality signal throughout
the network, and maintain the home thea-
tre system's stereo signal at the source.
RL-IF100
RL-IR305
RL-IR400
RL-RF210
RL-IR700
RL-IR800
RL-IR600
RL-RF200
RL-BV100
RL-MRA200
RL-MRA310
RL-RF125
HOME THEATRE