Specifications

SYSTEM MODE
System Mode Menus
V
X
810 REFERENCE GUIDE 49
TERMINAL INFO X DIAGS AND LOGS
SYS MODE MENU 2
MEMORY FUNCTIONS F2
TERMINAL INFO F3
CLOCK F4
©ª
To view device configuration information, select
TERMINAL INFO (F3).
To abort any action at any step, press
CANCEL.
SYS MODE MENU
SYSTEM INFO F2
DIAGS AND LOGS F3
To perform system diagnostic tests and view log
information, select
DIAGS AND LOGS (F3).
SYS MODE DIAGS
SMART CARD DIAG F2
KEYBOARD DIAG F3
MAG CARD DIAG F4
ª
To run a test on any inserted ICC or SAM cards,
select
SMART CARD DIAG (F2).
To run a test on the keypad, select
KEYBOARD DIAG
(F3).
To run a test on the magnetic stripe reader (MSR),
select
MAG CARD DIAG (F4).
SYS MODE DIAGS
SCREEN DIAG F2
IPP DIAG F3
©ª
To perform a diagnostic test on the screen, select
SCREEN DIAG (F2).
To perform a diagnostic test on the internal PIN pad,
select
IPP DIAG (F3).
SYS MODE DIAGS
REMOTE DIAGS F2
DEBUGGER F3
©ª
The REMOTE DIAGS (F2) functions are reserved for
VeriFone use only.
To use the debugging tool, select
DEBUGGER (F3).
SYS MODE DIAGS
ERROR LOG F2
TAMPER LOG F3
©
To view the error logs, select ERROR LOG (F2).
To view the tamper logs, select
TAMPER LOG (F3).
Table 9 System Mode Menu 2 (continued)
Display Action