Specifications

SYSTEM MODE
System Mode Menus
V
X
810 REFERENCE GUIDE 39
Entering System
Mode
The following describes how to enter system mode after you have turned on the
V
x
810.
NOTE
On successful completion, some operations automatically exit system mode and
restart the device. Other operations require that you exit system mode and restart
the device. To manually exit system mode, select
RESTART (F4) in
SYS MODE MENU 1.
Table 7 Entering System Mode
Display Action
VERIFONE VX810
QG000829
03/29/2007 VERIX
¹DEFAULT CERTIFICATE¹
COPYRIGHT 1997-2007
VERIFONE
ALL RIGHTS RESERVED
At startup, the device displays a copyright notice
screen that shows the device model number, the OS
version of the V
x
810 stored in the device’s flash ROM
memory, the date the firmware was loaded onto the
device, and the copyright notice.
This screen appears for three seconds, during which
time you can enter system mode by simultaneously
pressing F2 and F4.
You can extend the display period of this screen by
pressing any key during the initial three seconds. Each
key press extends the display period an additional
three seconds.
(Application Prompt)
or
DOWNLOAD NEEDED
¹GO FILE NOT FOUND
If an application already resides on the device, an
application-specific prompt is displayed. If no
application resides on the device, the following
message is displayed:
DOWNLOAD NEEDED
To enter system mode from this screen, simultaneously
press F2 and F4.
Note: The device will automatically download the file
VeriFone.zip from a USB flash drive without the
user having to go through System Mode under
the following conditions:
• The USB flash drive is connected before the device
is turned on.
• The USB flash drive is inserted when the initial
DOWNLOAD NEEDED message is displayed.
In both cases, the
USB DOWNLOAD COMPLETE
message will appear on the screen after the
VeriFone.zip file has been downloaded.