Specifications

Specialty Engines
Kohler 16211-ZL8-000 or 4185306-S or 1205301
Remove carburetor and studs; replacestudswith41/4”longstuds.
Install intake adapter between engine and carburetor, bend flywheel cover in intake area to
accommodate hose.
Use gaskets on both sides of intake adapter.
Install Intake Adapter with hose in forward down position.
Briggs 130000 Series Utility Engine (Tillers, Go-Carts, Pump, etc.)
Remove carburetor, top mount bolts, leave bottom mount bolt loose.
Install Intake Adapter with input straight up with hose above engine; place gaskets on both sides of
Intake Adapter.
Use longer studs than stock, use special nut for application.
Warning: Be careful not to over tighten bottom right bolt.
Part #796180 for 13HP -20HP Lawn Tractor Engine
Use11/2”longboltstosecurecarburetortoengine.
Tecumseh 16211-ZL8-000 (5HP-11HP engines for generators, log splitters, etc.)
Remove carburetor, use gaskets on both sides of intake adapter.
Studsincreasefrom¾”longto1½”longwithlockwashersandnuts.
Install Intake Adapter with hose down away from engine.
Kawasaki (V-Twin Engines) AF1-792295 FX751V, FX801V, FX850V, FX921V
These Kawasaki engines will need to have the orifices modified with a 1/4inch die and shortened to
the larger shoulder. Depending on the model, they may need to have washers added to the end of
the stud to compensate for a reduced thickness of the intake adapter.