EWM12U242418-R3 EWM12U242424-R3 EWM12U242430-R3 EWM20U362418-R3 EWM20U362424-R3 EWM20U362430-R3 EWM20U362430-R3 EWM26U482418-R3 EWM26U482424-R3 EWM26U482430-R3 EWM12UMFD-R3 EWM20UMFD-R3 EWM26UMFD-R3 EWM12URK-R3 EWM20URK-R3 EWM26URK-R3 EWM45DAB-R3 EWM90DAB-R3 EWM1U6SB-R3 Elite™ Wallmount Cabinet User’s Manual Fully assembled, ready-to-use wallmount cabinets. BLACK BOX ® EC24U3032 Customer Support Information Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S.
Trademarks Used in this Manual Trademarks Used in this Manual Black Box and the Double Diamond logo are registered trademarks, and Elite is a trademark, of BB Technologies, Inc. PLEXIGLAS is a registered trademark of Roehm GmbH & CO. VELCRO is a registered trademark of Velcro Industries B.V. Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.
Table of Contents Preface.................................................................................................................................................................................................... 4 Safety .................................................................................................................................................................................... 4 Safety Symbols Used in this Manual.............................................................
Preface/Safety Information Preface This manual is provided to prevent service personnel from committing an act that results in the risk of fire, electric shock, or injury to persons. Only trained service personnel should receive, unpack, and assemble the Elite Wallmount Cabinet. In addition, only trained service personnel should install equipment in enclosures.
Chapter 1: Specifications 1. Specifications 1.1 Size Table 1-1 lists specifications for the cabinet shown in Figures 1-1 through 1-4. Table 1-1. Cabinet size specifications. Door Height Exterior Depth Exterior Depth w/Hinges Exterior Height Interior Depth* Interior Height** Interior Width*** Part Number # of RUs Height Width Depth Door Width EWM12U242418-R3 12 24" 24" 18" 21.125" 17.875" 18" 18.75" 24" 17.25" 23.8" 23.8" EWM12U242424-R3 12 24" 24" 24" 21.125" 17.
Chapter 1: Specifications One pair of adjustable mounting rails tapped #10-32 UNF-2B Height 17.749" opening 18.312" centers Mounting rails Width Figure 1-1. Front view (doors removed for clarity). Depth — see Table 1-1 7.25 Depth Figure 1-2. Right side view. Page 6 724-746-5500 | blackbox.
Chapter 1: Specifications 10.00 3RU = 4.75 18.31 Figure 1-3. Top view. 9.00 Height (see Table 1-1) 9.00 10.00 16.00 Figure 1-4. Back view.
Chapter 2: Overview 2. Overview 2.1 Introduction Elite Wallmount Cabinets are designed to securely hold 19" rackmount equipment, networking equipment, phone equipment, etc. in tight spaces or closets. 2.2 Features • Large openings in the back panel enable easy installation of pre-wired equipment such as patch panels. • Ships with one conduit panel on the top and one solid panel on the bottom. • 3 RU Elite Cabinet accessories also fit the Elite Wallmount 3 RU openings, top and bottom. • Welded steel frame.
Chapter 3: Mounting Instructions 3. Mounting Instructions 3.1 Receiving, Unpacking, and Removing the Elite Wallmount Enclosure from the Pallet Inspect for damage and report damage if there is damage before receiving. Refer to Section 2.3 for what‘s included in the package. Unpack the enclosure by carefully removing the corrugated carton and corners. Avoid damaging the enclosure when removing packaging. WARNING: O nly trained service personnel should be used to remove the enclosure from the pallet.
Chapter 3: Mounting Instructions 3.3 Loading Equipment WARNING: Only install equipment after the Elite Wallmount has been properly secured and mounted to the wall. Maximum Load Capacity Rated or maximum load capacity for the Elite Wallmount: See the Weight Capacity specification on page 5. 3.4 Power When using power distribution units (PDUs), each PDU should be connected to a committed branch circuit that is rated for the continuous load of all the equipment connected.
Chapter 4: Operation 4. Operation 4.1 Operating the Door The Elite Enclosure is supplied with two locks (one for the front door and one to lock the middle section to the rear section). The middle section and rear section incorporate a grabber catch that enables the middle section to be held shut without locking. 4.2 Removing or Installing a Door Open the door beyond 90°, remove the top half of the upper hinge, then grasp the door with both hands and carefully lift it upward.
Chapter 4: Operation 4.4 Adjusting the Rails Mounting Rails One pair of 10-32 vertical mounting rails is installed in all Elite Wallmount Cabinets. Additional mounting rails are available as accessories. Figure 4-2. Adjusting the vertical mounting rails. Rails are attached using a sliding nut and hex bolt. Loosen both top and bottom bolts, using an 11-mm socket set, then adjust the rails front to back. Page 12 724-746-5500 | blackbox.
Chapter 5: Optional Accessories Drawings 5. Optional Accessories Drawings Figures 5-1 through 5-5 illustrate some of the Elite Wallmount Cabinet’s optional accessories. Optional angle brackets attach to the back panel of the cabinet for mounting 19" rackmount equipment such as patch panels and PDUs. Vertical stationary rails in rear section tapped #10-32 Optional EWM90DAB-R2—90° angle bracket 18.31 centers Optional EWM45DAB-R2—45° angle bracket kit Figure 5-1. Angle bracket and angle bracket kit.
Chapter 5: Optional Accessories Drawings Use the gland plate kit to close around cables to prevent unwanted airflow and keep dust and debris out. Optional EC3UGP Gland Plate Kit Figure 5-3. Optional EC3UGP Gland Plate Kit. Use the waterfall bracket to maintain bend radius when routing cables into the cabinet. Optional ECW3U waterfall bracket Figure 5-4. Optional ECW3U Waterfall Bracket. Page 14 724-746-5500 | blackbox.
Chapter 5: Optional Accessories Drawings Use the vent cover plate to keep dust and debris from entering the cabinet. EWMDCP-R2 Vent Cover Plate Figure 5-5. EWMDCP-R2 Vent Cover Plate.
Black Box Tech Support: FREE! Live. 24/7. Tech support the way it should be. Great tech support is just 60 seconds away at 724-746-5500 or blackbox.com. About Black Box Black Box Network Services is your source for an extensive range of networking and infrastructure products. You’ll find everything from cabinets and racks and power and surge protection products to media converters and Ethernet switches all supported by free, live 24/7 Tech support available in 60 seconds or less. © Copyright 2014.
