USER SETUPMANUAL GUIDE RS-TOUCH SERIES EME1C1-005 IN-SESSION ALERTWERKS COMMON 4-20mAMP SETTINGS CONVERTER 24/7 OROR VISIT BLACKBOX.COM 24/7 TECHNICAL TECHNICALSUPPORT SUPPORTAT AT1.877.877.2269 1.877.877.2269 VISIT BLACKBOX.
NEED HELP? LEAVE THE TECH TO US CHAPTER 1: INTRODUCTION AND SPECIFICATIONS LIVE 24/7 TECHNICAL SUPPORT 1.877.877.2269 1.1 INTRODUCTION The AlertWerks 4-20 mAmp signal converter is used to integrate the gateway with a 4-20 mAmp transmitter. 4-20 mAmp technology is used to communicate analog signals over long distances where electrical interference is a problem. This solution is often used in the process control industry to collect the analog values from a wide array of remote sensors.
NEED HELP? LEAVE THE TECH TO US LIVE 24/7 TECHNICAL SUPPORT CHAPTER 2: CONFIGURATION 1.877.877.2269 2.1 CONFIGURATING THE 4-20MA CONVERTER 1. Plug the sensor into one of the RJ-45 ports on the gateway. 2. Point your browser to the IP address of the unit (default, 192.168.0.100) and then log in as the administrator using your administrator password (default is “public”). You will then be taken to the summary page. 3. Select the sensor’s tab from the summary page.
NEED HELP? LEAVE THE TECH TO US LIVE 24/7 TECHNICAL SUPPORT CHAPTER 3: CONFIGURATION 1.877.877.2269 How Many Percent or How Many Unit (Max Scale): The field name is changed accordingly to the selected type of scale (absolute value or percentage). When the type of scale is set to Absolute, this field should be set to the maximum absolute value of a measured entity which is input to the 4-20mAmp Converter. When the type of scale is set to Percent, this field should be set to 100 percent.
NEED HELP? LEAVE THE TECH TO US CHAPTER 1:A: HEADLINE APPENDIX REGULATORY INFORMATION LIVE 24/7 TECHNICAL SUPPORT 1.877.877.2269 A.1 FCC STATEMENT This equipment has been tested and found to comply with the regulations for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
NEED HELP? LEAVE THE TECH TO US CHAPTER 1:A: HEADLINE APPENDIX REGULATORY INFORMATION LIVE 24/7 TECHNICAL SUPPORT 1.877.877.2269 A.4 NOM STATEMENT 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura. 3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de operación deben ser respetadas. 4.
NEED HELP? LEAVE THE TECH TO US CHAPTER 1:B: HEADLINE APPENDIX DISCLAIMER/TRADEMARKS LIVE 24/7 TECHNICAL SUPPORT 1.877.877.2269 B.1 DISCLAIMER Black Box Corporation shall not be liable for damages of any kind, including, but not limited to, punitive, consequential or cost of cover damages, resulting from any errors in the product information or specifications set forth in this document and Black Box Corporation may revise this document at any time without notice. B.
NEED HELP? NEED HELP? LEAVE THE LEAVE THETECH TECHTO TOUS US LIVE 24/7 LIVE 24/7 TECHNICAL TECHNICAL SUPPORT SUPPORT 1.877.877.2269 1.877.877.2269 © COPYRIGHT 2016 BLACK BOX CORPORATION. ALL RIGHTS RESERVED. © COPYRIGHT 2022. BLACK BOX CORPORATION. ALL RIGHTS RESERVED. EN_IOT_MANUAL_EME1C1-005_REV1_2210.
