DV900 Black Box Vehicle Video Recorder User Manual 2011 JAN. V1.0 ATBS Technology Co. http://www.tpms.
Table of Contents A. Features ......................................................................................................... 1 B. Specification.................................................................................................... 2 C. Structure of Product ........................................................................................ 3 D. Dimension........................................................................................................ 4 E.
A. Features 1. Ideal for personal car, taxi, trucks and buses. 2. Easy to install. Small in size to prevent blocking the driver's view. 3. Plug-n-Play. It can be recorded traffic information and outside driving conditions and inside sounds simultaneously. 4mm view angle 90 degrees(optional lenses M12) Store with Micro-SDHC Card (recommend to use Class4 above grade.) 4. 5. 6. Image data stored in Micro-SDHC Card can be completely against the vehicle moving in the shock. 7.
B. Specifications Item Specification Chipset H.264 Image compression chip Sensor Device VGA CMOS Sensor View Angle 4mmLens with view angle 90 degrees(optional for M12) Voltage Start transient voltage 5V ± 5% Operating Temp.
C.
D.
E. Installation Guide 2. Assemble the sucking disc and 1. Make the bracket facing upward. Micro SD card. 3. Set up the machine in proper 4. Adjust the viewing angle. position. 5. Install Interpreter: find OBD2 connecter & plug in. Use DVR cable to connect SDVR with interpreter. OBD2 connector DVR Cable 6.
6.1 Feature Automatically searches for protocols. RESET button for clear protocol memory. Provide speed, rpm, throttle, battery voltage, engine loading, Emergency Braking, DTC, Distance and temperature message. OBD TX LED: indicate interpreter send data to vehicle. OBD RX LED: indicate interpreter receive data from vehicle response. DATA OUT: indicate interpreter send data out to SDVR. ： 6.2 Learning protocol 6.2.1 ACC ON, do not start engine. 6.2.
F. Led Indicator Instruction Record Power LED 1. Power On / Recording Power on and wait for about a minute and then boot the machine completely. In the boot process, the green indicator will light on about one minute; the red indicator will flash, that is on recording. I. II. LED light indicator: ● RED light will be flashing during recording. ● GREEN light will be on when connect the power well. Power Off / Stop Recording When the power is off, the machine will stop recording.
CarBox2.exe Screen as shown below, press Play botton, Select the memory card; or select 『Open Document』 Select the memory card or the files stored on the hard disk to play; during file playback, if we want to pause the playback, we could directly tap the pause button to pause playback 。 ★Note: It is recommended to copy the product CD IBoxPlayer folder to the computer and conduct the entire operation of software. G. Software operation instruction 1.
2. Play & Settings Icon Instruction: 1 play previous file 2 play previous frame 3 play backward 4 Pause 5 Stop 6 Play 7 Play next frame 8 Play next file 9 Disk back up, transfer video and traffic information 10 setting 11 Open file 12 Snapshot 13 tools ，format memory card Disk backup Save the recorded files to your PC.
Select the origin from the SD card Setp2: Select the recorded file which you want to backup Step3: Choose the backup file format Offer SD Card Backup (*.sd) , AVI File Backup (*.avi) (1) SD card backup format SD File type (*.sd) (2)AVI File Backup(*.avi) (*.srt) When using AVI format, it will produce an AVI file, a file for subtitle display (*.srt) ,and traffic information Excel file.
Step5: Backup : Start backup the file to your specified destination Setting Before using the machine, please insert the micro SDHC card to the card reader and connect to the PC to set up the machine. When finished, you can insert the card back to the machine and start recording 1. password This function can encrypt the data and prevent others from accessing. Maximum letters are up to 15 digits.
： Time setting Use computer system for setting the time. 3. Unit of speed : Select vehicle speed unit. 4. Un i t of T em per a t ur e : S el ec t en g i ne t em per a tur e u n it . 5. G - S e ns or s e ns it i v i t y: O f f : tur n of f G - s ens or l ig h t: G - s e ns or ac ti v e wh e n G f or c e is l i gh t; He a v y : G - s e ns or ac t i v e wh e n G f or c e is lar g e. 6.
H. Formatting Memory Card 1. When You Should Format SDHC CARD? When you use the SDHC card for the first time or just purchase a new card, you should format it in order to use it correctly. (The bundled SDHC card has been formatted and tested by the manufacturer already.) 『 』 Click on Format to start formatting the SD card. Notice Before formatting SD memory card, please ensure to unlock it first. When formatting is completed, please insert the card into the machine for recording.
How to restore it? Steps: 『 』 1.) Insert the CD in your PC and click on Format to start formatting the SD card. 2.) 『 』 Click on Restore to restore the SD card. steps as reference Please see the following After finished, the memory card can be used for other purposes. 3.Language setting: select operation language. I. Caution： ： 1. Do not take off the Micro SD card under the recording or under power on status. 2. Please insert /Take out the Micro SD under the power off status. 3.
