User guide

SERVSWITCH DTX5000/5002 USER GUIDE
70
5. Choose Audio Performance. The Audio Performance Menu will appear. This menu
shows you the audio settings that you can choose from. The current setting is
indicated by an asterisk symbol *
Figure 4-42. Transmitter Audio Performance Menu
6. Type the number that corresponds to the audio setting you wish to apply and press
Enter.
NOTE:
If you choose “off,” audio support will be disabled.
7. To confirm your selection and exit the screen, type 0 (zero) and press Enter.
The
unit resets after you press Enter.
To change the audio performance setting for the receiver:
1. Activate the serial menu as described in “Accessing the serial menu” on page 42.
2. Choose option 1 to access the receiver menu. If the password option is enabled, you
will be prompted for a password. See “Authentication” on page 52.
3. Type the password and press Enter. The Receiver Main Menu will appear.
4. Choose Console Settings. The Console Settings Menu will appear. The current audio
performance setting is displayed beside menu item 4. Audio Performance.
Figure 4-43. Receiver Console Settings Menu