User guide

SERVSWITCH DTX5000/5002 USER GUIDE

3. Type the password and press Enter. The Receiver Main Menu will appear.

4. Choose Console Settings. The Console Settings Menu will appear. Your currently

selected OSD hotkey sequence is displayed beside menu item 1. OSD Hotkey

NOTE:

The layout of the Console Settings Menu is different for the Desktop and Extender modes. In this example

the screen is in Extender mode.

Figure 4-37. Receiver Console Settings Menu

5. Choose OSD Hotkey. The OSD Hotkey Menu will appear. This menu shows you the

hotkey sequences that you can choose from. The current hotkey sequence is indicated

by an asterisk symbol *.

Figure 4-38. OSD Hotkey Menu

6. Type the number that corresponds to the hotkey sequence you wish to apply and

press Enter.

7. To confirm your selection and exit the screen, type 0 (zero) and press Enter.