User guide

SERVSWITCH DTX5000/5002 USER GUIDE
64
NOTE:
Video-display problems may occur if video input settings are not configured correctly,
1. Activate the serial menu as described in “Accessing the serial menu” on page 42.
2. Choose option 2 to access the transmitter menu. If the password option is enabled,
you will be prompted for a password. See “Authentication” on page 52.
3. Type the password and press Enter. The Transmitter Main Menu will appear.
4. Choose Console Settings. The Console Settings Menu will display. The current video
input setting is displayed beside menu item 1. Target Video
NOTE:
In selection 2, Video Performance , 1 signifies lowest quality while 5 signifies highest quality.
Figure 4-34. Transmitter Console Settings Menu
5. Choose Target Video. The Target Video Menu will display (DTX5000 only).
Figure 4-35. Transmitter Target Video Menu
6. Choose menu item 1, DVI Normal.
7. Select the appropriate menu item.
8. To save your changes and exit the menu, type 0 (zero) and press Enter.
The unit resets after you press Enter.