User guide

CHAPTER 4: OPERATIONS
63
• boot and FPGA firmware version numbers;
• manufacturing part number.
All values are read-only.
Figure 4-33. Receiver Appliance Information Menu
To view transmitter system information:
1. Activate the serial menu as described in “Accessing the serial menu” on page 42.
2. Choose option 2 to access the transmitter menu. If the password option is enabled,
you will be prompted for a password. See
“Authentication” on page 52.
3. Type the password and press Enter. The transmitter Main Menu will appear.
4. Choose Appliance Information. The Appliance Information Menu will appear.
5. Choose Transmitter Appliance Information. The Transmitter Appliance Information
Menu will appear.
The Transmitter Appliance Information Menu screen contains the following information:
• transmitter name;
• EID number;
• release version;
• application;
• boot and FPGA firmware version numbers;
• manufacturing part number.
All values are read-only.
4.12 Configuring Video Input Settings
The Black Box ServSwitch DTX5000 Extender system is capable of transmitting either
digital (DVI) or analog video (VGA) from the remote computer to your analog/digital
monitor.
The Black Box DTX5002 Extender system is capable of transmitting only digital (DVI)
video from the remote computer to your analog/digital monitor.
The extender will normally operate well when set on its default settings. However, some
computers need the transmitter to be set for the dedicated video type to operate correctly
(DTX5000 only). In the case of the DTX5002, this is catered for automatically.