User guide

CHAPTER 4: OPERATIONS
61
3. Type the password and press Enter. The receiver Main Menu will appear.
4. Choose Restore Factory Defaults.
5. The receiver will now automatically reset. You will be automatically returned to the
Appliance Selection Menu screen.
6. During reset the receiver will drop the connection to the transmitter. When reset is
complete the receiver will restore the connection to the transmitter using the new
settings.
To restore the transmitter factory default settings:
1. Activate the serial menu as described in “Accessing the serial menu” on page 42.
2. Choose option 2 to access the transmitter menu. If the password option is enabled,
you will be prompted for a password. See “Authentication” on page 52.
3. Type the password and press Enter. The Transmitter Main Menu will appear.
4. Choose Restore Factory Defaults.
5. The transmitter will now automatically reset. During reset the transmitter will drop
the connection to the receiver. A system message will appear that states “Connection
to the transmitter is lost”. You will be returned to the Appliance Selection Menu
screen. The connection to the receiver will be restored.
4.10 Resetting the Black Box ServSwitch Digital
Workstation Extender
To reset the receiver:
1. Activate the serial menu as described in “Accessing the serial menu” on page 42.
2. Choose option 1 to access the receiver menu. If the password option is enabled, you
will be prompted for a password. See
“Authentication” on page 52.
3. The receiver Main Menu will appear.
4. Choose Reset Appliance. The Reset Appliance Menu will appear.
Figure 4-31. Receiver Reset Appliance Menu
5. Choose Receiver Reset to initiate the reset. A message will be displayed on the serial
menu that states “Resetting appliance...”. During reset the connection to the
transmitter is dropped. When the reset is complete, you will be automatically