User guide

CHAPTER 4: OPERATIONS
59
5. Choose Firmware Management. The Firmware Management Menu will appear.
Figure 4-29. Receiver Firmware Management Menu (upgrade via XMODEM)
6. Choose Receiver Flash Upgrade Via XMODEM. The connection to the transmitter
will be dropped.
7. Specify the location of the upgrade file and initiate the file transfer.
8. When the transfer has completed, a message will display stating “Firmware update
successful. Resetting Appliance...”
9. The connection to the receiver will be restored.
NOTE:
If the receiver determines that the upgrade file is invalid, the receiver cancels the upgrade and maintains
the previous firmware version. A message will display indicating that the firmware upgrade has failed.
To Flash upgrade your receiver using HTTP:
1. Download the receiver upgrade file from Black Box.
2. Activate the serial menu as described in “Accessing the serial menu” on page 42.
3. Choose option 1 to access the receiver menu. If the password option is enabled, you
will be prompted for a password. See
“Authentication” on page 52.
4. Type the password and press Enter. The Receiver Main Menu will appear.