User guide

CHAPTER 4: OPERATIONS
55
4. Choose Security Configuration. The Security Configuration Menu will appear.
Figure 4-26. Transmitter Security Configuration Menu
To disable or enable the transmitter password:
1. Choose Console Password on the Security Configuration Menu and press Enter.
If
a password has been enabled, this action will disable the password.
2. If a password has been disabled, you will be prompted to enter a password.
3. Type the new password and press Enter.
NOTE:
Each password must consist of ASCII characters and contain between 6 and 64 characters.
4. Confirm the new password. If successful, you will see a message stating that the
password has been changed.
5. Press Enter.
6. To save your changes and exit the menu, type 0 (zero) and press Enter.
To change the transmitter password:
1. Choose Change Console Password on the Security Configuration Menu. You will be
prompted to enter your current password.
2. Type your current password and press Enter. You will be prompted to enter the new
password.
3. Type the new password and press Enter.
NOTE:
Each password must consist of ASCII characters and contain between 6 and 64 characters.
4. Confirm the new password. If successful, you will see a message stating that the
password has been changed.
5. Press Enter.
6. To confirm the new password and exit the screen, type 0 (zero) and press Enter.
If you lose your transmitter password:
If you lose your transmitter password, you can reset the system to the default password
with the help of Black Box Technical Support.