User guide

CHAPTER 4: OPERATIONS
49
4. Type a valid IP address. Press Enter to return to the receiver Network Configuration
Menu.
5. Choose Receiver Netmask.
6. Type a valid Receiver Netmask. Press Enter to return to the receiver Network
Configuration
Menu.
7. Choose Receiver Default Gateway.
8. Type a valid receiver Default Gateway. Press Enter to return to the receiver Network
Configuration Menu.
9. Choose Static/DHCP Network Configuration option to toggle between Static and
DHCP
mode.
10. Type 0 (zero) and press Enter to return to the Network Configuration Menu.
11. If you made a mistake and do not wish to save the changes you made to the network
settings type C and press Enter.
12. To confirm your changes and apply those settings, type 0 (zero) and press Enter.
NOTE:
Changes to network configurations are applied only after you exit the Network Configuration Menu
13. The receiver will now automatically reset to apply the new network configuration.
During reset, the receiver will drop its connection to the transmitter. You will be
automatically returned to the Appliance Selection Menu screen. The connection will
be restored.
To access the Network Speed Menu:
1. Choose Network Speed in the Receiver Network Configuration Menu.
2. Press Enter. The Network Speed Menu will appear.
Figure 4-19. Network Speed Menu
NOTE:
The currently selected network speed, Auto-Negotiate, is marked with an asterisk.
To access the Management Appliance IP Configuration Menu:
3. Choose Appliance Mode in the Receiver Main Menu.
4. Press Enter. The Appliance Mode Menu will appear.