User guide

CHAPTER 4: OPERATIONS
47
19. Choose Transmitter IP Config. The Transmitter IP Config menu will appear. The old
transmitter IP address is displayed beside menu option 1.
Figure 4-15. Transmitter Configuration Menu on the receiver
20. Choose Transmitter IP Address. Type the new IP address for the transmitter. Press
Enter to return to the Transmitter IP Configuration Menu.
21. Type 0 (zero) and press Enter to return to the Network Configuration Menu.
22. If you made a mistake and do not wish to save the changes you made to the network
settings type C and press Enter.
23. To confirm your changes and apply those settings type 0 (zero) and press Enter.
The receiver will now automatically reset to apply the new network configuration.
Yo u will be automatically returned to the Appliance Selection Menu screen.
The
connection to the transmitter will be automatically restored.
To access the Network Configuration Menu in Desktop Mode:
24. Choose Appliance Mode in the Receiver Main Menu.
25. Press Enter. The Appliance Mode Menu will appear.
26. Select Desktop Mode and press Enter.
27. To confirm your changes and apply those settings type 0 (zero) and press Enter.
Yo u are now in Desktop Mode.
Figure 4-16. Appliance Mode Menu