User guide

SERVSWITCH DTX5000/5002 USER GUIDE
44
To configure network settings for the transmitter:
1. Activate the serial menu as described in “Accessing the serial menu” on page 42.
2. Choose option 2 to access the transmitter menu. If the password option is enabled,
you will be prompted for a password. See
“Authentication” on page 52.
3. Type the password and press Enter. The Transmitter Main Menu will appear.
Figure 4-10. Transmitter Main Menu
NOTE:
The Reset option in the transmitter Main Menu applies only to network settings.
4. Choose Network Configuration. The Network Configuration Menu will appear.
Figure 4-11. Network Configuration Menu