User guide

CHAPTER 4: OPERATIONS
41
To display system information in Extender Mode:
Press Print Screen. The Info dialog box will appear. By default, the Info dialog box
displays user information for your receiver.
Figure 4-7. Receiver connected to transmitter
1. Click the Rcvr radio button to view system information for your receiver.
2. Click the Trans radio button to view the system information for your transmitter.
If there is no transmitter connected, the Trans radio button option will display as No Target.
To dismiss the OSD:
On the keyboard, press ESC or use the mouse to click the ‘X’ button on the top right-hand
corner of the OSD dialog box.
4.4 The Serial Menu
The receiver incorporates a serial menu that allows you to:
• Configure network settings for the receiver
• Configure network settings for the transmitter
• Set or change passwords
• Upgrade your firmware for the receiver and transmitter
• Reset to factory defaults
• Set a session time-out value
• Change the audio performance settings
• Configure the transmitter for normal aspect or wide screen resolutions
Info User
Appliance Info
Name: RX_00E0860502 A7
Release Version : 1.1.1.0
MAC Address :00:E0:86:05:02:A7
IP Address : 192.168.0.1
Appli ance Name
Mgmt App IP : 192.168.0.12
Info
Rcvr
Trans