User guide

SERVSWITCH DTX5000/5002 USER GUIDE
36
4.2 Accessing the System
When the receiver is powered up, it will automatically initiate a connection with the
remote
computer.
To access the remote computer:
1. Power up the receiver.
2. A series of messages will be displayed on the screen to inform you of the progress of
the connection.
3. You will be able to interact with the remote computer as if it were located at your desk.
NOTE:
If the remote computer has been powered down, the receiver cannot establish a connection.
4.3 The OSD
The receiver incorporates an On-Screen Display (OSD) that allows you to view information
about the configuration of your system in Desktop Mode and in Extender Mode.
Displaying system information using the OSD
The OSD enables you to display the firmware release of the receiver and the transmitter.
For optimum performance, keep your firmware current. For more information, see “Flash
Upgrading your Black Box ServSwitch Extender” on page 56. The OSD also enables you
to view the IP address and MAC address of both the receiver and transmitter.
RJ-45 Connector LEDs
LED Indication Meaning
LED 1
Green static Linked at 1 Gbps
Green flashing Linked at 100 Mbps
Green off No Link
LED 2
Yellow static Linked but no activity
Yellow flashing Transmit/receive activity