User guide

SERVSWITCH DTX5000/5002 USER GUIDE
26
3. Power up the receiver. A connection will be automatically established with the
remote computer.
NOTE:
VGA monitors can be connected to the receiver by using a DVI-I to VGA adaptor.
Figure 3-3. Receiver and transmitter Installation
Connecting Power
The receiver features an external power supply. A DC power jack is located on the rear of
the receiver.
NOTE:
Use only the power supply provided by Black Box.
To connect power to the receiver:
1. Plug the external power supply’s 2.5mm connector into the DC power jack on the
rear of the receiver.
2. Connect the detachable IEC power cord to the power supply.
3. Plug the IEC power cord into an appropriate wall outlet.
Microphone
Speakers
Transmitter
Remote
PC
Receiver
Local Peripherals
attached via USB
External
Power
Supply
PS/2
Serial