Specifications

Chapter 10 User Groups
10.5 Changing User Group Members
When users are created, they may be assigned to one or more built-in or user-defined user groups. You may add or
remove users to or from the built-in and user-defined user groups.
To add or remove user group members:
NOTE: Members may only be assigned to or removed from user groups defined on the internal DTX Control authentication service.
1. Click the Users tab.
2. Click Groups in the top navigation bar. Built-In will automatically be selected in the side navigation bar and the User
Groups - Built-in window will open. To display the User Groups - User Defined window, click User-Defined in the side
navigation bar.
3. Click on a user group name. The User Group Properties window will open.
4. Click Members in the side navigation bar. The User Group Members window will open.
5. Click Assign. The Assign Users to User Group window will open.
6. To add one or more users to the user group, select the user(s) in the Available Users list, then click Add. The users
will be moved to the Members list.
7. To remove one or more users from the user group, select the user(s) in the Members list, then click Remove. The
users will be moved to the Available Users list.
8. Click Save and then click Close. The User Group Members window will open.
9. Click Close. The User Groups - Built-In or User Groups - User Defined window will open (depending on which groups
you were working with).
You may also add or remove a user from a built-in or user-defined user group by clicking on a username in a User
Accounts window and changing its user group membership. See Changing User Group Members on page 89.
10.6 User Group Access Rights
Access rights indicate whether a user is allowed to perform certain actions on a unit in the DTX Control system.
You may assign access control rights from a user group perspective. You select a user group, specify the units for which
rights will be assigned, then indicate the permission to perform the action (none, allow, deny or inherit) for each unit. That
procedure is described in this section.
There are other ways to assign access rights:
• From a user perspective
• From a unit perspective
• From a unit group perspective
To display user group access rights:
1. Click the Users tab.
2. Click Groups in the top navigation bar. Built-In will automatically be selected in the side navigation bar and the User
Groups - Built-in window will open. To display the User Groups - User Defined window, click User-Defined in the side
navigation bar.
3. Click on a user group name. The User Group Properties window will open.
Page 89 724-746-5500 | blackbox.com