Specifications

Chapter 9 Managing User Accounts
To add or remove access rights through a user account:
1. Click the Users tab.
2. Click on a username.
3. Click Access Rights in the side navigation bar. The User Access Rights window will open.
4. To add or remove a unit or unit group from the Unit and Unit Groups list, click Edit List. The User Access Rights Unit
Selection window will open.
• To add one or more units/unit groups, select the units/groups in the Available list, then click Add. The units/unit
groups will be moved to the List to Update list.
• To remove one or more units/unit groups, select the units/groups in the List to Update list, then click Remove.
The units/unit groups will be moved to the Available list. (Inherited users and user groups can only be removed
from the first unit group that specified any access rights other than inherit.)
5. Click OK. The User Access Rights window will display the current list of units/unit groups.
6. To add/remove access rights for a unit/unit group, select a unit or unit group from the Unit and Unit Groups list, then
enable or disable a checkbox in the Access Rights table for each access right.
• Allow - the access right is allowed for the user.
• Deny - the access right is denied for the user.
• Inherit - the access right is inherited from the unit group(s) to which the selected unit/unit group belongs. When
Inherit is selected, the Allow and Deny checkboxes will become gray and unchangeable, and indicate the
inherited value. If the inherited settings indicated both Allow and Deny, the inherited value is Deny, which takes
precedence.
To disable the inherit functionality, uncheck the Inherit checkbox.
• If none of the checkboxes are checked, the access right is neither allowed nor denied.
7. Repeat the preceding step for other units/unit groups.
8. Click Save and then click Close.
NOTE: Only user accounts with configuration rights will be allowed to change a user station's IP address from the on-screen display (OSD).
724-746-5500 | blackbox.com Page 83