Specifications

Chapter 9 Managing User Accounts
4. Type any information you wish.
5. Click Save and then click Close.
9.6.9 Custom field properties
You may specify any information you wish in the six custom fields. Custom field properties may be changed only for
internal authentication users.
To change the custom fields:
1. Click the Users tab.
2. Click on a username.
3. Click Custom Fields in the side navigation bar. The User Custom Fields window will open.
4. Type information in the fields.
5. Click Save and then click Close.
9.7 User Access Rights
Access rights indicate whether a user is allowed to perform certain actions on a unit in the DTX Control system.
You may assign access control rights from a user perspective. You select a user account, specify the units for which
rights will be assigned, then indicate the permission to perform the action (none, allow, deny or inherit) for each unit. That
procedure is described in this section.
There are other ways to assign access rights:
• From a user group perspective
• From a unit perspective
• From a unit group perspective
To display a user’s access rights:
1. Click the Users tab.
2. Click on a username. The User Name window will open.
3. Click Effective Rights in the side navigation bar and then click All Units, Target Devices or Appliances. The Target
Device Effective Rights or Appliance Effective Rights window will open. Columns indicate the available actions for
the unit.
• Black check mark - The user has been granted access for this right.
• Gray check mark - A group to which the user belongs has been granted access for this right.
• Black X - The user has been denied access for this right.
• Gray X - A group to which the user belongs has been denied access for this right.
• No check mark - No access has been granted or denied for this right.
The access rights display for a target device may contain information that appears invalid.
4. Click Close when you are finished reviewing the access rights. The User Accounts window will open.
Customizing Appliance and Target Device Access Rights windows
The Name field is always displayed in the Target Device Access Rights and Appliance Access Rights windows. The
action fields may also be displayed. Use the Customize link to add or remove fields in the display.
Page 82 724-746-5500 | blackbox.com