Specifications

Chapter 8 Authentication Services
a. To select one or more certificates, click the checkbox to the left of the server IP addresses. To select all
certificates on the page, click the checkbox to the left of the IP Address heading.
b. Click Register above the IP Address list to register the certificates. The Accept SSL Certificate window will
open.
c. Click Save to store the certificate values to the DTX Control database on the host or click Close if you do not
wish to save the certificate values.
The Authentication Service Certificate Management window will open if only one certificate was
selected. If more than one certificate was selected, each will appear in order in subsequent Accept SSL
Certificate windows.
17. To unregister certificates:
a. To select one or more certificates, click the checkbox to the left of the server IP addresses. To unregister all
certificates, click the checkbox to the left of the IP Address heading.
b. Click Unregister to unregister the certificates.
c. A confirmation message box will appear. Confirm or cancel the operation.
18. Click Close. The User Authentication Services window will open.
To change user browsing settings for the Active Directory external authentication service:
1. Click the Users tab.
2. Click Authentication Services in the top navigation bar. The User Authentication Services window will open.
3. Click the name of the AD service. The side navigation bar will change to include the name of the AD service at the top
and, below the name, the information you may define.
4. From the side navigation bar, click User Browsing. The Authentication Service User Browsing - AD window will open.
5. Click Browse Anonymously to browse users on the external Active Directory authentication server.
-or-
Click Browse with User Credentials to browse users on the external Active Directory authentication based on
credentials configured on the server. If this option is selected, do the following:
a. Type the username for an Active Directory account that has browse rights in the User Name field. The log in ID
must be entered in case sensitive text if the Active Directory server is set up to use Kerberos.
b. Type the password for an Active Directory account that has browse rights in the Password field.
NOTE: The DTX Control server verifies that the new credentials are valid for the AD service. If the credentials are invalid, an error message is
displayed.
6. Click Save and then click Close. The User Authentication Services dialog box will appear.
8.1.3 Windows NT external authentication service
To add a Windows NT external authentication service:
1. Click the Users tab.
2. Click Authentication Services in the top navigation bar. The User Authentication Services window will open.
3. Click Add. The Add Authentication Service Wizard will appear.
4. The Provide Authentication Service Name and Type window will open.
a. Type a name for the external authentication service.
724-746-5500 | blackbox.com Page 62