Specifications

Chapter 6 Unit Sessions and Connections
3. From the Receiver drop-down list, select the lead user station.
4. Click the checkbox next to the desired transmitter.
5. Click Force Connectionor Force Disconnection.
NOTE: If at any time the leader logs out, all user stations in the user station group will be logged out regardless of their mode or connection.
6.2 Active Sessions
There are two types of active session displays: all active sessions in your system and active session information for each
target device.
6.2.1 All active sessions
To display information about all active sessions:
1. Click the Units tab.
2. Click Active Sessions in the side navigation bar. The Active Sessions window will open.
3. To display information about a session, click on the name in the Start-Date-Time column. The Active Session
Information window will open.
4. Click Close to close the window and return to the Active Sessions window.
Viewing Active Sessions
The Start-Date-Time field, which indicates when the target device session was started, is always displayed in the Active
Sessions window:
The following fields are displayed in the Active Sessions window. Use the Customize link to add or remove fields in the
display.
• Duration - Length of the DTX Control system session.
• User Name - User who initiated the session, which may be a user, a local port user or a user with a local user
account.
• Receiver - User station.
• Connected Target Computer - Name of the target device being used for the session.
• Transmitter - Device connected to the user station.
• Status - Current state of the connection.
To disconnect an active session from an appliance window:
You must have the Reboot Appliance and Disconnect Sessions unit access right.
1. In a Units View window containing appliances, click on the appliance name.
2. Click Appliance Settings in the side navigation bar. Then click Sessions in the side navigation bar, then Active. The
Appliance Sessions window will open.
3. To disconnect one or more sessions, click the checkbox to the left of the sessions. To disconnect all sessions on the
page, click the checkbox to the left of Start-Date-Time at the top of the list.
4. Click Disconnect. A confirmation dialog box will appear.
5. Confirm or cancel the disconnect.
724-746-5500 | blackbox.com Page 45