Specifications

Chapter 6 Unit Sessions and Connections
6.1.2 Multi-video Follow Mode
To create a user station group and designate targets for Multi-video Follow Mode:
1. Click the Units tab.
2. Select Follow Mode from the side navigation bar.
3. Select the UserStation Groups tab and click New.
4. In the Receivers drop-down list, select the user station that you wish to be the leader and click Add. The user station
will move to the top of the configuration table.
5. In the Receivers drop-down list, select a user station that will be a follower in the group and click Add.
6. Repeat step 5 for each user station that will be part of the group.
NOTE: You can make any user station within the configuration table the leader by moving it to the top of the table using the arrow button at the
bottom of the screen.
7. Click the Multi-video Mode checkbox.
8. Click Save.
9. Select the Target Groups tab and click New.
10. From the Transmitters drop-down list, select the transmitter that you want the lead user station to follow and click
Add.
11. From the Transmitters drop-down list, select the transmitter that you want the user station listed on the second row of
the UserStation Groups configuration table to follow.
12. Repeat step 11, row by row, for every user station that you added in step 5.
NOTE: The transmitters in Multi-video Follow mode can be set to private or share mode since only one receiver will connect to each transmitter.
13. Click Save.
6.1.3 Force Mode
Force Mode allows the administrator to force a user login or logout or a connection or disconnection between a receiver
and a transmitter from within the DTX Control web interface.
NOTE: You must force a login before you can force a connection.
To force a login/logout:
1. Click the Units tab.
2. Select Force Login/Logout in the side navigation bar.
3. From the Username drop-down list, select the user.
4. Click the checkbox next to the desired receiver. Click Force Login or Force Logout.
5. Repeat steps 3 and 4 for all users.
To force a connection or disconnection:
1. Click the Units tab.
2. Select Force Connections in the side navigation bar.
Page 44 724-746-5500 | blackbox.com