Specifications

Chapter 5 Managing Units
4. The DTX Control appliance will search for managed units within the IP address range. When the search is completed,
the Select Units to Add window will open, listing the results.
5. To add one or more managed units, select the managed units in the Units Found list, then click Add. The managed
units will be moved to the Units to Add list.
6. To remove one or more managed units, select the managed units in the Units to Add list, then click Remove. The
managed units will be moved to the Units Found list.
7. Click Next.
8. The Completed Successfully window will open. To exit the Add Unit Wizard, click Finish.
5.3.3 Adding units on an IP subnet
This procedure is valid for transmitters and DTX user stations.
To add a unit from a subnet:
1. In a Units - All window containing managed units, click Add. The Add Unit Wizard Welcome Window will open. Click
Next.
2. The Select Add Unit Procedure window will open. Click Discover units on an IP subnet address and then click Next.
The Enter Subnet Address Window will open.
3. Type the IP address in standard dot notation (xxx.xxx.xxx.xxx) and click Next.
4. The DTX Control appliance searches for managed units within the IP subnet address range. When the search is
completed, the Select Units to Add window will open, listing the results.
5. To add one or more managed units, select the managed units in the Units Found list, then click Add. The managed
units will be moved to the Units to Add list.
6. To remove one or more managed units, select the managed units in the Units to Add list, then click Remove. The
managed units will be moved to the Units Found list.
7. Click Next.
8. The Completed Successfully window will open. To exit the Add Unit Wizard, click Finish.
5.4 The Unit Overview Window
To view a summary of all units managed by the DTX Control appliance, click the Units tab. The Units - All window will
open, showing all the units that are managed by the DTX Control appliance. To view a list that contains only transmitters
or only user stations, select the appropriate option in the side navigation bar.
To view information about individual user stations or transmitters, click on a specific unit listed in the Units - All window.
The Unit Overview window opens.
When the Unit Overview window opens, the following information is displayed:
• For Managed Units (user stations and transmitters) - Name, Type, EID, MPN, Address, MAC address and status of
the managed units and the tools that can be used to reboot and upgrade firmware. The available tasks depend on the
type of managed unit.
• For Authorized Target Computers - Display Name, Type, Address and MAC address
The Unit Overview window also enables you to change the name of a unit, reboot a unit or upgrade the firmware of a unit.
See Managing firmware upgrades on page 37 for more information on upgrading your firmware.
To change the name of a unit:
1. Click the Units tab. A list of all units managed by the DTX Control appliance is displayed.
Page 34 724-746-5500 | blackbox.com