Specifications

Chapter 4 Units View Windows
4.5 Unit Overview Windows
You may change the overview information for one target device from a Unit Overview window. From a Units View
window, you can change the type or icon for several target devices in one operation. This may be helpful when you want
to assign the same values to several units.
To change overview information for a target device:
1. In a Units View window containing target devices, click on the name of a target device. The Unit Overview window
will open.
2. Enter a name for the target device.
3. Enter a type for the target device.
4. Select a new icon for the target device using the arrows.
5. Click Save and then click Close. The Units View window will open. If you added a type that was not previously
defined, it will appear under Target Devices in the side navigation bar.
To change the name of a managed appliance from the Unit Overview window:
1. Under Unit Settings - Summary, click on the name of an appliance. The Unit Overview window will open.
2. Type a name for the managed appliance. (You cannot change the type.)
3. Click Save and then click Close. The Units View window will open.
4.6 Unit Status Window
To use the Unit Status window:
1. Click the Units tab, then click Unit Status in the side navigation bar.
2. The Unit Status window opens.
3. You can filter what units are displayed by selecting a status from the Filter menu. Each unit status is color-coded. The
default filtered status is Active Status which displays only currently active units.
4. You can select how often the Unit Status is updated by selecting a time from the Interval menu.
5. You can view the Unit Overview window by double-clicking the unit name, or right-clicking the unit name and
selecting Show Unit Overview.
Page 30 724-746-5500 | blackbox.com