Specifications

Chapter 3 Installation and Setup
NOTE: When the Fast Switch option is enabled, security protocols will be disabled and data will not be encrypted.
To enable the Fast Switch Enable system option:
1. Click System - DTX Control..
2. Click Fast Switch in the side navigation bar.
3. Click the Fast Switch checkbox to enable or disable the option. All appliances will be rebooted for the change to take
effect.
NOTE: Fast Switch Enable is disabled in the DTX Control factory default settings.
NOTE: When the DTX Control discovers a new unit that you've added to the system, it will automatically enable or disable the Fast Switch Enable
system option to match the current system settings.
3.8 Next Steps
At this point, only the administrator can log in to the DTX Control appliance. Now the administrator may choose to add
and manage units or set up additional user accounts. Users can also add and manage units if they are assigned access
rights by the administrator.
To add and manage units, see:
• Units View Windows on page 27
• Managing Units on page 31
• Unit Sessions and Connections on page 43
• Grouping Units on page 47
To configure authentication services and units, see:
• Authentication Services on page 56
• Managing User Accounts on page 75
• User Groups on page 84
724-746-5500 | blackbox.com Page 26