Specifications

Basic Operation
Key Finder
Head Unit (e.g. DEH-P6300)
Remote Controller (e.g. DEH-P6300)
You can operate in the same way with the Remote Controller supplied with the Head Unit.
For details, refer to the Head Unit’s Operation Manual.
5/∞/2/3 buttons
FUNCTION button
BAND button
5/∞/2/3 buttons
SOURCE button
Buttons 1–6
FUNCTION button
BAND button
Switching Power ON/OFF
Each press of the SOURCE button selects XM as follows.
Built-in CD Player =
TV = Tuner = DAB = Multi-CD Player = XM tuner (External
Unit 1) =
External Unit 2 = AUX = ...
• To switch the sources OFF, hold down the SOURCE button for 1 second.
Note:
• When two external units are connected, the allocation of them to External Unit 1 or External Unit 2 is
automatically set by the Head Unit.
Basic Operation of XM
1. Select XM.
2. Select a desired Channel.
Note:
• For details, refer to “Selecting the Channel by Channel Number”.
3. Turn the source OFF.
Note:
• Display changes as follows when you switch Channels or operate in other ways.
Channel Number =
Channel Name = Selected Display *
* For details, refer to “Switching the Display”.
• It may take a few seconds before you can hear anything while this product acquires and processes the
satellite signal when you switch power ON, change the source to XM Tuner, or select a Channel.
Hold for 1 second
SOURCE
DISP
EQ
123456
3456 EB
SFEQ
SELECT
Each press changes the Source ...
SOURCE
DISP
EQ
123456
Recalling Preset Channels
7 Direct Recall
• Press a button from 1–6 to recall a Channel preset in the button.
(e.g. Press button 4.)
7 Sequential Recall
When Channel Number Select mode is selected, you can use the sequential recall. (Refer to
“Switching the Channel Select Mode”.)
• Recall Channels preset in buttons 1–6 in sequence.
Note:
• If a Channel you have recalled cannot be selected, a message is displayed for 2 seconds and the unit
returns to the operating status before the Channel was recalled.
Changing the Band
To enable this product to memorize more Channels, they are stored in three bands: XM1,
XM2 and XM3.
• Switch bands.
XM1 = XM2 = XM3
Each press changes the Band ...
FUNC
AUDIO
3
456 EB
SFEQ
SELECT
3456 EB
SFEQ
SELECT
SOURCE
DISP
EQ
123456
Selecting the Channel by Channel Number
When Channel Number Select mode is selected, you can select a desired Channel by
Channel Number. (Refer to “Switching the Channel Select Mode”.)
Initially, Channel Number Select mode is selected.
• Select a desired Channel.
Note:
• Channels that cannot currently be selected are skipped, and the next Channel is selected.
• If you continue pressing the button for longer than 0.5 seconds, you can increase/decrease Channel
Number by 10 to enable you to quickly jump to your desired Channel.
• You can also select a Channel from a desired Channel Category. (Refer to “Switching the Channel
Select Mode”.)
Preset Memory
Preset Memory lets you store Channels in memory.
1. Select a desired Channel to store in memory.
2. When sound from a selected Channel is output, press a button from 1–6 for 2
seconds to store that Channel. (e.g. Press button 4.)
The Channel is stored in the selected button.
Note:
• Memory/recall are for broadcasts. If you recall a memorized broadcast that has been moved to anoth-
er Channel, the Channel to which the broadcast was moved is selected.
Hold for 2 seconds
SOURCE
DISP
EQ
123456
3456 EB
SFEQ
SELECT