Specifications

97
APPENDIX B: AT Commands
Table B-1 (continued). AT Commands
Command Title Default
AT_An LLB Control 0
AT_Bn DBU Number to Dial 0
AT_Cn SR Control During Test 0
AT_Dn RTS-CTS Delay 0
AT_En DBU Originate/Answer 0
AT_Fn Scrambler Control 0
AT_Gn DBU When OOS 0
AT_Hn DBU When No RX Signal 0
AT_In DBU When No Sealing Current 0
AT_Jn Auto Answer Enable/Disable 0
AT_Kn DBU Enable/Disable 0
AT_Ln DTE Routing Main/Backup 0
AT_N=xx Set Network Address none
AT_Pn Front Panel Enable/Disable 0
AT_Rn RLB Enable/Disable 0
AT_S=xx Set Serial Number none
AT_Tn Select Test Pattern 0
AT_Xn Clock Source Select 0
AT_Yn Secondary Channel Rate Select 0