User's Manual

Remote Console Manager Quick Start Guide
724-746-5500 | blackbox.com
Page 7
Figure 5. Serial & Network: Users & Groups screen.
 To grant limited access to the management console, check the “User”
group. To grant full access to the management console, check the
“Admin” group. By default, the user is granted no management console
access.
 Click “Apply.”
NOTE: The Remote Console Manager comes with a default certificate for
initial configuration purposes only. You will need to direct your browser to
(temporarily) proceed and accept this untrusted certificate. It is
recommended as soon as possible thereafter you generate and install a new
trusted certificate. To produce the unique CSR and later upload the newly
issued certificate, select System: SSL Certificates.
Step 6: Custom setup.

The Remote Console Manager family has various models that may require
some custom setup:
 LES1203A-M has an internal modem that can be configured for dial-in
access (or dial-out failover connection) using the Internal Modem Port
tab under System: Dial menu.
 LES1203A-11G comes with an internal 802.11 wireless modem that can
be configured using the Wireless LAN Interface menu in the System: IP
menu. The wireless LAN is deactivated by default and when enabled will
operate as the main network connection. Failover is available (though it is
not enabled by default).
 LES1204A-3G-R2 comes with an internal 3G cellular modem— and its
own Quick Start Guide.